FloorStyle - Vinyl Flooring Wholesaler | Malaysia Vinyl Flooring Supplier

No Glue, No Click, Just Lay.

Globally proven loose-lay system designed primarily for heavy commercial installations. Uniquely structured to ensure uncompromising stability. Available in a captivating variety of designs and sizes.

No Glue, No Click, Just Lay.

Proven loose-lay system install in global market mainly for heavy commercial instalation with its unique structure of unparalleled dimensional stability, divers design, and size options.

Specification

Name	Thickness [mm]	Wear Layer	Size [mm]	Pcs	Sq.ft per Box
Plank	5mm	0.30mm / 0.55mm	180mm x 1201mm (7" x 47")	10	23
			Plank	5mm	0.30mm / 0.55mm	235mm x 1505mm (7" x 47")	6	23
						Square	5mm	0.30mm / 0.55mm	914.4mm x 914.4mm (36" x 36")	3	27

Installation

Prior to installation, the subfloor must be heated for 14 days if heating is available, and if not, allow sufficient time to dry out completely.
Room temperature must be maintained at 18˚C or higher before and during installation.
The flooring must be allowed to acclimate in the room to be installed for a minimum of 24 hours and be stacked flat on the floor to avoid bending the floor.
Prior to installation, please ensure that both color and lot# are the same.
When installing ECOLAY+, be sure to keep dust, dirt or foreign particles away from the locking strip.

Maintenance

Regularly sweep floor to remove sand and grit that can scratch floor.
For best results, use only water with a mop. Avoid flooding the floor with too much water.
For heavily soiled areas, use a neutral ph balanced floor cleaner.
Use caution when lifting boxes.
Promptly remove any standing water to avoid slippage.
Keep ECOLAY+ on the flat surface to keep it from warping.

Advantages